How to take care of your wool clothing?
Wool is a noble, natural and temperature-regulating fiber, appreciated for its enveloping warmth, its natural elasticity and its timeless elegance. Because wool fibers are delicate and prone to felting or shrinking from heat and friction, a few simple steps are enough to preserve their beauty, shape and softness over time.
Washing
- Wash your piece at a maximum temperature of 30°C on a certified wool program or hand wash. Always use a special wool detergent (neutral pH) and strictly avoid bleaching agents or softeners, which alter the natural protective layer of the fiber.
- Pieces made of pure wool or fine blends should ideally be washed inside out, or gently washed by hand without rubbing or wringing, to prevent the fibers from tangling.
Rinsing
- Thorough rinsing in clear, lukewarm or cold water (maintaining the same temperature as that of the washing cycle) is the secret to removing all soap residue, avoiding stiffness in the fabric and keeping the wool fibers perfectly soft and fluffy.
Drying
- Drying flat on a clean towel, away from any direct heat source and the sun, is essential. Machine drying is absolutely prohibited, as intense heat and spinning cause severe shrinkage and irreversible felting.
Ironing
- Wool is naturally wrinkle resistant and often just needs to be hung in a damp bathroom to dewrinkle. If ironing is necessary, do it inside out at low temperature using a damp cloth, or use a gentle steam iron to bring the fibers back to life.
- Dry cleaning is also an option, particularly recommended for tailored wool coats, structured blazers or ultra-fine knits.
The small gestures that make the difference
Avoid tumble drying to prevent severe shrinkage and irreversible felting
Choose an ultra-gentle spin at low speed (maximum 400 to 600 rpm) to avoid deforming the garment
Dry your wool pieces flat on a dryer rather than hanging them when wet, as the weight of the water can relax the silhouette
Always use a patemouille (protective fabric) when ironing to avoid burning the fiber or creating shiny areas on the surface
